This is the ENGENOVATE 1000 One Channel CAN Bus Controller designed and manufactured by Engenovate Systems Corporation for several years for Skid Steer Solutions and later Skid Steer Genius, LLC as the SG-CB-1000 or -1000A. We are in no way associated with Steer Genius LLC. If you have just one valve control – you don’t need to pay for a 2 output CAN bus controller. This product has a single output to drive a single solenoid hydraulic valve. The output is rated at 8 amps continuous output current. It is provided with the standard mating plug cable for the 7 Pin CAN Bus receptacle on many Bobcat products. The pigtail cable in the photo is also included in the basic price. The output turns on and stays on while a stick button is pressed. Pressing another button turns on and latches an output on until either button is tapped to turn off the output. Or turned on and latched by using another button. We designed all of the original SSG controllers starting in 2015 providing Skid Steer Solutions with a much larger 2 channel controller. We have designed and produced thousands of CAN Bus controllers for solenoid control of hydraulic valves on machines. We also manufacture other standard CAN Bus controllers as well as custom controllers for complex attachments. Engenovate Systems Corporations is not associated in any way with Skid Steer Genius, LLC, The Bobcat Company or the Doosan Group.