Skid Steer Auxiliary Connector – 14 Position Attachment Side Complete Kit. Kit commonly fits most Cat D series, Kubota, Gehl, Mustang, New Holland, Case, JCB/Volvo, Takeuchi, Yanmar & John Deere skid steers. Kit Includes – As shown in picture. New connector – includes all components (qty 1). New replacement sockets for all 14 positions (qty 14). New pin removal tool (qty 1). Removing old connector – Slide the removal tool around the wire and push gently into the connector until it stops. Then pull the wire straight away from the connector and the wire, socket and tool should slide out of the connector. Attaching the new sockets to the wires – Strip the wire insulation back just far enough for clean wire to slide into the back of the socket and reach the bottom. Crimp or solder the socket to the wire. Check proper installation by gently pulling on the wire. The socket should be locked into place and should not slide out. CT Design Tech – Bringing Back America’s Quality.