https://tractorsloadersskid.com Thu, 23 Apr 2026 00:08:50 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tractorsloadersskid.com/2026/04/skid-steer-aux-control-harness-14-pin-8-6-function-deutsch/ https://tractorsloadersskid.com/2026/04/skid-steer-aux-control-harness-14-pin-8-6-function-deutsch/#comments Tue, 21 Apr 2026 00:03:47 +0000 https://tractorsloadersskid.com/2026/04/skid-steer-aux-control-harness-14-pin-8-6-function-deutsch/ Skid Steer Aux Control Harness 8′ – 6 Function with Deutsch. 8′ Aux Control Harness – Supports 6 solenoids/ 3 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® &… Read more →

]]>




Skid Steer Aux Control Harness 8′ – 6 Function with Deutsch. 8′ Aux Control Harness – Supports 6 solenoids/ 3 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® & John Deere® Skid Steers. NOTE: Ground wire needs to be re-positioned to be compatible with John Deere® Skid Steers.

]]> https://tractorsloadersskid.com/2026/04/skid-steer-aux-control-harness-14-pin-8-6-function-deutsch/feed/ 0 https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-2-function-deutsch-2/ https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-2-function-deutsch-2/#comments Fri, 21 Nov 2025 16:05:49 +0000 https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-2-function-deutsch-2/ Skid Steer Aux Dual Control Harness 8′ – 2 Function with Deutsch. 8′ Aux Control Harness – Supports 2 solenoids/ 1 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar®… Read more →

]]>









Skid Steer Aux Dual Control Harness 8′ – 2 Function with Deutsch. 8′ Aux Control Harness – Supports 2 solenoids/ 1 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® & John Deere® Skid Steers. NOTE: Ground wire needs to be re-positioned to be compatible with John Deere® Skid Steers.

]]> https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-2-function-deutsch-2/feed/ 0 https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-4-function-deutsch-2/ https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-4-function-deutsch-2/#comments Sat, 15 Nov 2025 15:49:18 +0000 https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-4-function-deutsch-2/ Skid Steer Aux Control Harness 8′ – 4 Function with Deutsch. 8′ Aux Control Harness – Supports 4 solenoids/ 2 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® &… Read more →

]]>




Skid Steer Aux Control Harness 8′ – 4 Function with Deutsch. 8′ Aux Control Harness – Supports 4 solenoids/ 2 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® & John Deere® skid steers. NOTE: Ground wire needs to be re-positioned to be compatible with John Deere® Skid Steers.

]]> https://tractorsloadersskid.com/2025/11/skid-steer-aux-control-harness-8-4-function-deutsch-2/feed/ 0 https://tractorsloadersskid.com/2025/08/skid-steer-aux-control-harness-8-6-function-deutsch-14-pin-connector/ https://tractorsloadersskid.com/2025/08/skid-steer-aux-control-harness-8-6-function-deutsch-14-pin-connector/#comments Mon, 25 Aug 2025 18:41:41 +0000 https://tractorsloadersskid.com/2025/08/skid-steer-aux-control-harness-8-6-function-deutsch-14-pin-connector/ Or Visit Us At All Skidsteers. Got a Question About A Product? Here at All Skidsteers, we guarantee the Qualit y of all the parts we sell! 14-Pin 8′ 6 Function Deutsch Attachment Harness. This is the 14. Ground wire needs to be re-positioned From B to A for John Deere® Skid Steers. R and we will let you know… Read more →

]]>




Or Visit Us At All Skidsteers. Got a Question About A Product? Here at All Skidsteers, we guarantee the Qualit y of all the parts we sell! 14-Pin 8′ 6 Function Deutsch Attachment Harness. This is the 14. Ground wire needs to be re-positioned From B to A for John Deere® Skid Steers. R and we will let you know if this will fit your machine. Fits Bobcat Skid Steer.

]]> https://tractorsloadersskid.com/2025/08/skid-steer-aux-control-harness-8-6-function-deutsch-14-pin-connector/feed/ 0 https://tractorsloadersskid.com/2025/06/skid-steer-aux-control-harness-8-2-function-deutsch/ https://tractorsloadersskid.com/2025/06/skid-steer-aux-control-harness-8-2-function-deutsch/#comments Sat, 28 Jun 2025 03:49:07 +0000 https://tractorsloadersskid.com/2025/06/skid-steer-aux-control-harness-8-2-function-deutsch/ Skid Steer Aux Dual Control Harness 8′ – 2 Function with Deutsch. 8′ Aux Control Harness – Supports 2 solenoids/ 1 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar®… Read more →

]]>





Skid Steer Aux Dual Control Harness 8′ – 2 Function with Deutsch. 8′ Aux Control Harness – Supports 2 solenoids/ 1 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® & John Deere® Skid Steers. NOTE: Ground wire needs to be re-positioned to be compatible with John Deere® Skid Steers.

]]> https://tractorsloadersskid.com/2025/06/skid-steer-aux-control-harness-8-2-function-deutsch/feed/ 0 https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-6-function/ https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-6-function/#comments Sun, 13 Apr 2025 09:12:44 +0000 https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-6-function/ Skid Steer Aux Control Harness – 6 Function. New auxiliary control harness to support 6 solenoids / 3. Functions in 2 directions. Pin removal tool (This is to be able to re-pin the skid steer side of the harness if you prefer to use a different control output). Length – 8′ Extreme duty cable insulation. Skid Steer Connector – 14… Read more →

]]>





Skid Steer Aux Control Harness – 6 Function. New auxiliary control harness to support 6 solenoids / 3. Functions in 2 directions. Pin removal tool (This is to be able to re-pin the skid steer side of the harness if you prefer to use a different control output). Length – 8′ Extreme duty cable insulation. Skid Steer Connector – 14 Pin. Commonly fits most Cat D series, Kubota, Gehl, Mustang, New Holland, Case, JCB/Volvo, Takeuchi, Yanmar & John Deere skid steers with 14 pin connectors. NOTE: Ground wire must be repositioned for John Deere Skid Loaders. Moving a Pin location – Slide the removal tool around the wire and push gently into the connector until it stops. Then pull the wire straight away from the connector and the wire, socket and tool should slide out of the connector. Check proper installation by gently pulling on the wire. The socket should be locked into place and should not slide out. Made in the USA! CT Design Tech – Bringing Back America’s Quality!

]]> https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-6-function/feed/ 0 https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-pin-8-6-function-deutsch/ https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-pin-8-6-function-deutsch/#comments Fri, 11 Apr 2025 21:09:41 +0000 https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-pin-8-6-function-deutsch/ Skid Steer Aux Control Harness 8′ – 6 Function with Deutsch. 8′ Aux Control Harness – Supports 6 solenoids/ 3 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® &… Read more →

]]>






Skid Steer Aux Control Harness 8′ – 6 Function with Deutsch. 8′ Aux Control Harness – Supports 6 solenoids/ 3 functions in 2 directions. Pin Removal Tool So you can re-pin the machine side of the harness if you would like. Fits/Compatible with: (with 14 Pin Connectors) Cat D series®, Kubota®, Gehl®, Mustang®, New Holland®, Case®, JCB/Volvo®, Takeuchi®, Yanmar® & John Deere® Skid Steers. NOTE: Ground wire needs to be re-positioned to be compatible with John Deere® Skid Steers.

]]> https://tractorsloadersskid.com/2025/04/skid-steer-aux-control-harness-8-pin-8-6-function-deutsch/feed/ 0 https://tractorsloadersskid.com/2024/06/skid-steer-dual-solenoid-auxiliary-control-harness-10/ https://tractorsloadersskid.com/2024/06/skid-steer-dual-solenoid-auxiliary-control-harness-10/#comments Sat, 22 Jun 2024 13:27:53 +0000 https://tractorsloadersskid.com/2024/06/skid-steer-dual-solenoid-auxiliary-control-harness-10/ Dual Solenoid Auxiliary Control Harness – 10. Commonly fits most Cat D series, Kubota, Gehl, Mustang, New Holland, Case, JCB/Volvo, Takeuchi, Yanmar & John Deere skid steers with 14 pin connectors. NOTE: Ground wire must be repositioned for John Deere Skid Loaders. New auxiliary control harness to support 2 solenoids / 1 function in 2 directions. Pin removal tool (This… Read more →

]]>





Dual Solenoid Auxiliary Control Harness – 10. Commonly fits most Cat D series, Kubota, Gehl, Mustang, New Holland, Case, JCB/Volvo, Takeuchi, Yanmar & John Deere skid steers with 14 pin connectors. NOTE: Ground wire must be repositioned for John Deere Skid Loaders. New auxiliary control harness to support 2 solenoids / 1 function in 2 directions. Pin removal tool (This is to be able to re-pin the skid steer side of the harness if you prefer to use a different control output). Removing old connector – Slide the removal tool around the wire and push gently into the connector until it stops. Then pull the wire straight away from the connector and the wire, socket and tool should slide out of the connector. Attaching the new sockets to the wires – Strip the wire insulation back just far enough for clean wire to slide into the back of the socket and reach the bottom. Crimp or solder the socket to the wire. Check proper installation by gently pulling on the wire. The socket should be locked into place and should not slide out. Made in the USA! CT Design Tech – Bringing Back America’s Quality!

]]> https://tractorsloadersskid.com/2024/06/skid-steer-dual-solenoid-auxiliary-control-harness-10/feed/ 0 https://tractorsloadersskid.com/2024/06/skid-steer-aux-control-harness-8-4-function-deutsch/ https://tractorsloadersskid.com/2024/06/skid-steer-aux-control-harness-8-4-function-deutsch/#comments Fri, 21 Jun 2024 13:21:47 +0000 https://tractorsloadersskid.com/2024/06/skid-steer-aux-control-harness-8-4-function-deutsch/ Skid Steer Aux Control Harness – 4 Function. New auxiliary control harness to support 4 solenoids / 2. Functions in 2 directions. Pin removal tool (This is to be able to re-pin the skid steer side of the harness if you prefer to use a different control output). Length – 8′ Extreme duty cable insulation. Connector – 14 Pin. Commonly… Read more →

]]>







Skid Steer Aux Control Harness – 4 Function. New auxiliary control harness to support 4 solenoids / 2. Functions in 2 directions. Pin removal tool (This is to be able to re-pin the skid steer side of the harness if you prefer to use a different control output). Length – 8′ Extreme duty cable insulation. Connector – 14 Pin. Commonly fits most Cat D series, Kubota, Gehl, Mustang, New Holland, Case, JCB/Volvo, Takeuchi, Yanmar & John Deere skid steers with 14 pin connectors. NOTE: Ground wire must be repositioned for John Deere Skid Loaders. Moving a Pin location – Slide the removal tool around the wire and push gently into the connector until it stops. Then pull the wire straight away from the connector and the wire, socket and tool should slide out of the connector. Check proper installation by gently pulling on the wire. The socket should be locked into place and should not slide out. Made in the USA! CT Design Tech – Bringing Back America’s Quality!

]]> https://tractorsloadersskid.com/2024/06/skid-steer-aux-control-harness-8-4-function-deutsch/feed/ 0